Page 6 - PW_Care_Catalogue
P. 6

CONFIDENCE IN COMPLIANCE





          Basins                                               Location and clearance for washbasins and fittings

          • Basins must have a maximum depth off the wall of 400mm.
          • Centre line of basin must be at least 400mm from a wall
           forming a return.
          • Basins must provide a minimum clearance of 675mm
           underneath the basin.
          • Water supply pipes and waste outlets must not encroach
           on the required clear space.
          • Exposed hot water pipes are to be insulated or covered.

          • Must be a clear space of at least 760mm wide and 1200mm
           deep in front of basin.

          • Must be positioned near to the toilet with its nearest edge
           a minimum of 300mm away from front of pan.

          • Plugs must be connected to, or form part of, the basin.

          Tapware

          • A mixed flow of water delivered through a central outlet.

          • Max water temp of 55 degrees.
          • All tapware controls at 50-60mm clearance of any obstruction.
          • Handles must be lever or capstan which are easily operated by someone with limited hand function.

          Grab Rails                                           Toilet unit fittings:
                                                               Positioning of grab rail and paper roll holder
          • Handrails must be rounded with an outside dimension
           of between 30-40mm and shall be non-slip.
          • There must be a clear space of 50mm minimum between
           the rail and the wall for the full length.
          •  They must be capable of sustaining a force of 110kg applied
           in any direction at any point for a period of 2 minutes with
           no sign of fracture or permanent deformation of greater
           than 1mm after force is removed.
          •  Grab rails must be placed next to a toilet, with a 90 degree
           shape 750mm long and 750mm high and at a height of
           700mm from the floor to the horizontal rail.

          • The vertical portion of the grab rail must be between
           150-250mm away from front of pan.


          Other

          •  Toilet paper dispenser and sanitary napkin receptacles must be located within easy reach of person using the toilet.

          • Paper holder zone is within the 300mm from front of pan at a height of between 460-700mm above the floor.
          •  Soap dispensers, sanitary towel disposal units, hand-dryers etc. must be installed at a height between
           900-1200mm above floor and must not encroach on wheelchair manoeuvring space.
          • If a mirror is provided, the lower edge must not be more than 1000mm above floor level.




          6 // PLUMBING WORLD ACCESSIBLE LIVING CATALOGUE
   1   2   3   4   5   6   7   8   9   10   11